Use UPC1651 diy signal generator
By SZ123 • 2009-07-06 • Category: Radio-Base • RSS 2.0 • Trackback •
IC1, C1 component of the about 400HZ low-frequency oscillator; IC2, C3 component of the about 37MHZ high-frequency oscillator, C2 output from the low-frequency signals of high frequency modulation signals. C4 and antenna composition launch system. High-frequency harmonic oscillator in three TV channels to receive (or other channel) show a black-and-white section of the grid signal. A point, B point of the output signal, respectively, and the images of low-frequency channel for the detection of signal source. The C3 can replace quartz crystal oscillation frequency stability, as shown in Figure dashed part. C3 if the Department received a terminal or socket, to C3, respectively, into crystal; frequency selected 465KHZ, 10.7KHZ, 6.5KHZ, 4.43MHZ, 37MHZ can do on the radio and TV-IF signal source.
» Previous post: 1.5V Battery operated FM transmitter
» Next post: Use upc1651 diy fm transmitter
